1
Everyday fixes
Cat6 patch cable comb for 24 cables
This is not a fixed STL. SpeakCAD generates the cat6 patch cable comb for 24 cables to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a patch cable comb 100×30×8 mm, two rows of 12 slots 6.2 mm with 5 mm snap throat, central cable-tie slot, PETG.
What a cat6 patch cable comb for 24 cables is
A comb that keeps 24 Cat6 patch cables (about 6 mm each) in neat rows behind a switch. Two rows of 12 slots are 6.2 mm with a 5 mm snap throat, the comb is 100 × 30 × 8 mm, and a slot in the middle takes a cable tie. Print in PETG flat.
Slim Cat6A or 28 AWG patch leads are thinner and need a 4 mm slot. Open the model in SpeakCAD without paying, set the cable diameter in the viewer or the chat, then download the STL.
People also search
cable comb stlcat6 cable comb 3d printethernet cable comb 24patch cable comb 3d model
Questions people ask about a cat6 patch cable comb for 24 cables
A comb that keeps 24 Cat6 patch cables (about 6 mm each) in neat rows behind a switch. Two rows of 12 slots are 6.2 mm with a 5 mm snap throat, the comb is 100 × 30 × 8 mm, and a slot in the middle takes a cable tie. Print in PETG flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a patch cable comb 100×30×8 mm, two rows of 12 slots 6.2 mm with 5 mm snap throat, central cable-tie slot, PETG.
Slim Cat6A or 28 AWG patch leads are thinner and need a 4 mm slot. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Frame bag clip for top tubeTop-tube bags held by velcro straps slide and scuff the paint, while a rigid clip holds them square.Laundry basket clip-on dryer sheet caddyDryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold.Roborock S8 dock threshold ramp for door sillsA gentle ramp that lets a Roborock S8, S7 MaxV or Q Revo climb a 20 to 25 mm door threshold that otherwise stops it dead, and a matching wedge that levels th…Rivian R1S Gen 2 console trayA tray that sits in an R1S Gen 2 console bin and splits keys, cards and a USB-C cable, 180 × 90 × 30 mm with 1.2 mm walls.AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.Peak Design Everyday Backpack zip AirTag pouchA pouch that slips an AirTag into the 25 mm webbing of an Everyday Backpack 20L or 30L so it is not hanging on a zipper.