1
Everyday fixes
10 inch rack TL-SG108 switch shelf
This is not a fixed STL. SpeakCAD generates the 10 inch rack tl-sg108 switch shelf to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a 10 inch 1U shelf for a TL-SG108, 254×44.45 mm panel, 150×20 mm port window, 160×105 mm tray with 2 mm lip, 6.5 mm slots at 236.5 mm.
What a 10 inch rack tl-sg108 switch shelf is
A 1U shelf that holds a TP-Link TL-SG108 8-port switch (158 × 101 × 25 mm) in a 10 inch rack with the ports flush to the front. The panel is 254 × 44.45 mm with 6.5 mm slots at 236.5 mm centres, the port window is 150 × 20 mm, and the tray is 160 × 105 mm with a 2 mm side lip. Print in PETG, 3 mm walls.
The TL-SG105 is 100 mm wide and would slide around. Open the model in SpeakCAD at no cost, adjust it for your switch in the viewer or the chat, then download the STL.
People also search
10 inch rack switch shelf stltl-sg108 rack mount 3d printmini rack 8 port switch10 inch rack switch mount 3d model
Questions people ask about a 10 inch rack tl-sg108 switch shelf
A 1U shelf that holds a TP-Link TL-SG108 8-port switch (158 × 101 × 25 mm) in a 10 inch rack with the ports flush to the front. The panel is 254 × 44.45 mm with 6.5 mm slots at 236.5 mm centres, the port window is 150 × 20 mm, and the tray is 160 × 105 mm with a 2 mm side lip. Print in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a 10 inch 1U shelf for a TL-SG108, 254×44.45 mm panel, 150×20 mm port window, 160×105 mm tray with 2 mm lip, 6.5 mm slots at 236.5 mm.
The TL-SG105 is 100 mm wide and would slide around. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
10 inch rack Raspberry Pi 5 shelf (1U)A 1U shelf that holds two Raspberry Pi 5 boards (85 × 56 mm) side by side in a 10 inch rack, ports facing the front.Cup holder phone mount with gooseneck baseA cup holder phone mount avoids sticky dash pads and suction cups by wedging into a cup holder with an expanding base.Luggage tag with hidden address slotA luggage tag makes a suitcase easy to spot on the belt and keeps your address hidden from casual glances.Litter-Robot 3 step ramp for small cats and kittensA step that sits in front of a Litter-Robot 3 or Litter-Robot 4 and lowers the jump into the globe, which is around 250 mm off the floor and too high for a k…Hyundai Ioniq 6 charge-port holsterA garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle.Tesla Cybertruck frunk bin dividerA divider that splits the Cybertruck frunk side bin (about 400 × 180 mm) so a lock and a towel do not become one pile.