Adapters & couplers

VESA adapter plate, 75 mm to 100 mm

A flat plate that lets a monitor with a 75 x 75 mm VESA pattern hang on an arm or wall mount built for 100 x 100 mm. It is a 120 mm square, 5 mm thick, with four 4.5 mm holes at 75 mm spacing for M4 screws into the monitor and four countersunk 5 mm holes at 100 mm spacing for the mount. The countersinks face opposite ways so the screw heads do not clash, and a 2 mm perimeter chamfer tidies it up.

Whether you need 75 to 100, 100 to 200 or an off-centre offset to clear a stand, SpeakCAD draws the plate to the spacing you type. Preview it free in your browser and, if the screws collide, ask for the holes shifted or a thicker plate in one message.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a VESA adapter plate 120x120x5 mm with a 2 mm perimeter chamfer. Four 4.5 mm holes at 75x75 mm spacing countersunk from the back, four 5 mm holes at 100x100 mm spacing countersunk from the front. Add a 30 mm centre cutout for cable routing.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

Microphone stand thread adapter, 3/8 to 5/8 inchA threaded bushing that lets a European 3/8 inch microphone stand accept a US 5/8 inch 27 TPI clip or shock mount.Square to round duct adapter, 100 mmA transition piece that connects a 100 mm round ventilation hose to a 110 x 110 mm square wall grille or fan housing, common in bathroom extract fans and sma…PopSocket base to MagSafe ring adapter plateA thin plate that takes a standard PopSocket PopGrip base on one side and a stick-on MagSafe ring on the other, so the grip snaps onto an iPhone 15, 16 or Ga…Insta360 X3 to GoPro finger mount adapterThe Insta360 X3 and X4 use a 1/4-20 tripod thread on the base, while bike, helmet and chest mounts use the GoPro three-finger interface.Raspberry Pi Camera Module 3 GoPro mount adapterAn adapter that puts a Raspberry Pi Camera Module 3 on any GoPro-style mount, giving access to hundreds of clamps, suction cups and helmet mounts.IKEA Besta cable pass-through grommet for a 60 mm holeA two-part grommet that finishes a hole drilled through the back or shelf of an IKEA Besta TV bench so HDMI and power cables pass through cleanly without che…

Make your vesa adapter plate, 75 mm to 100 mm now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.