1
Garden & outdoor
Rain barrel diverter for 2 × 3 inch downspouts
This is not a fixed STL. SpeakCAD generates the rain barrel diverter for 2 × 3 inch downspouts to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a rain barrel diverter for 2×3 inch downspout, 52×77 mm sockets 40 mm deep, internal collector lip, 19 mm hose barb, ASA.
What a rain barrel diverter for 2 × 3 inch downspouts is
A rain barrel diverter for the common US 2 × 3 inch rectangular downspout, about 51 × 76 mm outside. Rectangular sockets 52 × 77 mm and 40 mm deep take the cut ends, a collector lip inside sends the flow to a 3/4 inch (19 mm) hose barb, and extra water carries on to the ground. Print upright in ASA with 1.6 mm walls.
3 × 4 inch downspouts are much larger and will not fit. Open the ready-made diverter in SpeakCAD at no cost, change any millimetre in the viewer or the chat, then download the STL.
People also search
rain barrel diverterdownspout diverter 2x3rain barrel downspout adapter stlrain diverter 3d print
Questions people ask about a rain barrel diverter for 2 × 3 inch downspouts
A rain barrel diverter for the common US 2 × 3 inch rectangular downspout, about 51 × 76 mm outside. Rectangular sockets 52 × 77 mm and 40 mm deep take the cut ends, a collector lip inside sends the flow to a 3/4 inch (19 mm) hose barb, and extra water carries on to the ground. Print upright in ASA with 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a rain barrel diverter for 2×3 inch downspout, 52×77 mm sockets 40 mm deep, internal collector lip, 19 mm hose barb, ASA.
3 × 4 inch downspouts are much larger and will not fit. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Cowboy Cruiser ST phone-pad riserA 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem.Sea to Summit Spark footbox vent clipA clip that holds a Spark bag's footbox vent open on a humid night, 20 mm snap.AHT20 Stevens screen radiation shieldA stacked Stevens screen that shades an AHT20 or SHT31 breakout from sun and rain so outdoor readings do not jump 5 °C at noon.3-way connector for 10 to 12 mm bamboo canesA connector that joins three bamboo canes into a corner for net frames and bean supports.Raised bed corner connectorTimber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles.Solar garden light ground stakeSolar path lights come with flimsy stakes that snap in dry soil or when a foot catches them, and once the stake is gone the light is useless.