Tools & jigs

Position stop block for 8 mm slot profile

A stop block that bolts into the 8 mm slot of a 40 series aluminium profile and marks where a seat or pedal deck belongs, so two drivers can share a sim rig and find their position again. It is a 40 × 30 × 20 mm block with a 7.8 mm rib that keeps it square to the slot and a counterbored hole for one M8 socket head bolt and T-nut. Print it solid, lying on a long side so the bolt hole is horizontal, without supports. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Create a position stop block for a 40 series aluminium profile with an 8 mm slot, to mark where a seat or pedal deck sits for one driver. Block 40 mm long, 30 mm wide and 20 mm tall. On the underside a locating rib 7.8 mm wide and 2 mm tall along the full 40 mm length, centred. One vertical 8.4 mm hole in the centre for an M8 bolt into a T-nut, with a 14 mm counterbore 8 mm deep from the top for a socket head. Both 30 mm end faces flat and square to the rib; 1 mm chamfer on the top edges. Print on a long side face so the hole lies horizontal, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

Stop blocks on model sites are mostly drawn for 20 series profile and M5 bolts, or for inch profile whose slot is a different width, and on a 40 series rig they rock in the slot. Tell SpeakCAD your slot width and bolt, and how tall the stop face must be to catch your seat rail or pedal plate.

Also searched as: t-slot stop block stl, 8mm slot position stop 3d print, sim rig seat position stop, aluminium profile stop block 4040.

Questions people ask about a position stop block for 8 mm slot profile

A stop block that bolts into the 8 mm slot of a 40 series aluminium profile and marks where a seat or pedal deck belongs, so two drivers can share a sim rig and find their position again. It is a 40 × 30 × 20 mm block with a 7.8 mm rib that keeps it square to the slot and a counterbored hole for one M8 socket head bolt and T-nut. Print it solid, lying on a long side so the bolt hole is horizontal, without supports.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your position stop block for 8 mm slot profile

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the tools & jigs on the marketplace, where makers share their models, most of them free.