1
Everyday fixes
Motorcycle AirTag under-seat holder
This is not a fixed STL. SpeakCAD generates the motorcycle airtag under-seat holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a motorcycle AirTag holder, 33×9.5 mm pocket, 1.2 mm top skin, screw cap with O-ring groove, two 5 mm cable tie slots, PETG.
What a motorcycle airtag under-seat holder is
A sealed pocket for an AirTag (31.9 mm across, 8 mm thick) that screws or zip-ties under a motorcycle seat, where a thief is unlikely to look. The pocket is 33 × 9.5 mm with a 1.2 mm top skin so the speaker and signal get through, a screw-on cap with an O-ring groove, and two 5 mm slots for 4 mm cable ties. Print flat in PETG or ASA.
A Tile Mate or Chipolo ONE is a different size and will rattle. Open the ready-made holder in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
motorcycle airtag holderairtag motorcycle hidden mount stlairtag under seatmotorbike airtag case 3d print
Questions people ask about a motorcycle airtag under-seat holder
A sealed pocket for an AirTag (31.9 mm across, 8 mm thick) that screws or zip-ties under a motorcycle seat, where a thief is unlikely to look. The pocket is 33 × 9.5 mm with a 1.2 mm top skin so the speaker and signal get through, a screw-on cap with an O-ring groove, and two 5 mm slots for 4 mm cable ties. Print flat in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a motorcycle AirTag holder, 33×9.5 mm pocket, 1.2 mm top skin, screw cap with O-ring groove, two 5 mm cable tie slots, PETG.
A Tile Mate or Chipolo ONE is a different size and will rattle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Tesla Model 3 seat gap filler for center consoleA wedge that fills the 25 to 35 mm gap between the front seat and the center console in a Tesla Model 3 or Model Y so keys, cards and fries stop disappearing…AirTag saddle-rail stealth coverA cover that looks like a rail bumper and holds an AirTag between 7 mm rails with 1 mm TPU lips.AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.Garmin Edge 540 out-front mount 22.2 mmAn out-front mount that puts an Edge 540 on a 22.2 mm road bar with a Garmin quarter-turn and a GoPro boss underneath.DJI Osmo Pocket 3 belt clip holsterA belt holster for the DJI Osmo Pocket 3 (139.7 × 42.2 × 33.5 mm) that carries it head-down with the gimbal protected.Aquarium feeding ring with suction armA feeding ring stops flakes drifting into the filter intake and concentrates food where slow fish can find it.