The best 3D prints for your desk setup in 2026, sized to your own gear (with the prompts)
Ten desk prints worth designing rather than downloading: hooks, under-desk mounts, trays, stands and holders, each with what to measure and its prompt.The best desk prints are the ones no model site can size for you: the hook that fits your desk's thickness, the tray that sits on your monitor stand, the holder cut for the hub you own. Here are 10, each with the one measurement that decides the fit and a prompt to paste into SpeakCAD with your number in it. Where a download or a shop part is the better answer, the item says so.
The short answer
- Print first: the headphone hook and the power strip brackets.
- Most used: the pen and tool tray, laid out around what is on the desk now.
- Download or buy instead: a cradle moulded to one controller, an articulated arm, a monitor riser. SpeakCAD is a CAD for functional parts with real sizes, not for sculpted shapes.
Every prompt carries example sizes: swap in yours. The gaps follow the clearance table: about 0.5 mm per side where something slides in and out, 0.2 to 0.3 mm where it should stay put.
1. A headphone hook that slips onto your desk edge
Measure: the desk top's thickness at the edge (25 mm here; measure yours). The gap is that plus 0.3 mm per side.
Look elsewhere if the edge is bevelled or framed underneath: screw on the hook from 20 useful prints from one sentence.
2. Brackets that hold the power strip under the desk
Measure: the strip's width and height at its fattest point, switch included.
Look elsewhere if the top is glass: a clamp-on tray from a shop needs no drilling.
3. A cradle for the power brick
Measure: the brick's length, width and height at the widest point. Leave the ends open for the cables, ask for slots because a brick needs air, and print in PETG: PLA softens at around 55 to 60 °C.
Look elsewhere if the thing to hang is a desktop computer: that weight belongs on a steel bracket.
4. A tray on the monitor stand's foot
Measure: the foot's width and depth, and the neck where the stand rises, which gets a cutout.
Look elsewhere if you want the screen higher: a board on four printed feet is stronger than a printed riser, which is also wider than most beds.
5. A cable comb for the back edge
Measure: each cable's diameter with a calliper, in the order the cables leave the desk.
How to design cable clips and cable management covers the clip types and PLA against PETG. Look elsewhere if any size will do: a bag of adhesive clips is quicker.
6. A stand for the laptop or the tablet
Measure: the device's thickness at its thickest point, feet or case included. The slot is that plus 1 mm. A closed laptop stands upright in a wide block; a tablet leans at 60 to 70°, and the stand guide has the lip and the base depth for it.
Look elsewhere if you want the laptop open, raised and tilted: a metal stand carries that heat and weight better, and the part is wider than most beds.
7. A pen and tool tray laid out around your things
Measure: each group of things the way you would like to find them, plus 5 mm for fingers.
It is also a part to shape by hand, free: a box hollowed with Shell, dividers placed with Add. Look elsewhere if it goes in a drawer: the drawer organiser guide covers tapering drawers and splitting for the bed.
8. A holder for the dock or the USB hub
Measure: the hub's length, width and thickness, and which sides carry ports. Measure the plugs you use, not the sockets: a USB-C plug with its shell is about 12 x 7 mm.
Look elsewhere if the dock runs hot to the touch: leave it in open air.
9. A controller stand
A cradle that follows one controller's curves is a job for a model site (where to download STL files). Measure: the width across the two grips, and how thick one grip is.
10. A mount for the webcam or the light
Measure: the thickness of the shelf or the screen edge it sits on. If the camera or the light has a tripod socket (a 1/4-20 thread), do not print the thread: leave a 6.5 mm hole and use a real tripod screw.
Look elsewhere if it needs a ball joint or a friction hinge: buy the arm and print the adapter.
How we picked
- Does it have to fit something only you own? If any size will do, a download is quicker.
- Is it one measurement and one sentence? Ten measurements make a project, not a desk print.
- Does it print flat, without supports, on a bed of 180 to 256 mm?
- Is plastic the right material? Not for a monitor's weight, and not next to real heat.
From the prompt to the desk
For the hook's gap, the laptop slot or the hub's sleeve, Fit Check cuts a five-minute test slice of the fit before the long print. The file leaves as an STL, a 3MF or G-code sliced for one of 380+ printers, and the print time calculator says how long your printer will take.
Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.
Prompts to start from
Open one in the builder, change the numbers to yours, and the model renders in your browser, usually within a minute or two. Keep adjusting in the chat before you print.A headphone hook that slips onto a desk edge 25 mm thick: a C clamp 30 mm wide with a 25.6 mm gap, 60 mm deep, 4 mm walls, and below it an arm 45 mm long with a 20 mm upturned tip, its top rounded so it does not dent the headband, printed lying on its side
Two brackets that hold a power strip 52 mm wide and 40 mm tall under a desk: each a U shape 20 mm long with 0.5 mm clearance and 3 mm walls, a flange on both sides, and a 4.5 mm hole in each flange for a 4 mm wood screw
An under-desk holder for a USB hub 110 x 45 x 15 mm: a sleeve with 0.5 mm clearance and 2 mm walls, open along the long side with the ports and at the cable end, a thumb cutout to push the hub out, and two countersunk holes for 4 mm screws
Questions
The ones sized to your own gear: a headphone hook that fits the desk's thickness, brackets that hold the power strip and its brick under the top, a tray laid out around your pens and tools, a stand for the laptop or tablet at your angle, and a holder for the dock or hub. Each needs one measurement, and each is a fixed, wrong size when downloaded.
Measure the thickness of the desk top at its edge with a calliper and make the hook's gap that plus about 0.3 mm per side, so 25.6 mm for a 25 mm top. Make the clamp 4 mm thick, round the top of the arm so it does not dent the headband, and print the hook lying on its side so the layers run along the load.
You can print its feet, and a tray for the stand's foot, but the riser itself is usually wider than a print bed and carries the monitor's weight. A wooden board on four printed feet is stronger and quicker than a riser printed in pieces.
PLA for trays, stands and hooks that stay cool indoors. PETG for anything under the desk next to a power brick, on a sunny windowsill or that has to flex, because PLA softens at around 55 to 60 °C and snaps rather than bends.