Printer clearance

Bambu Lab P2S 0.4 nozzle clearance

What 13 first tries on this printer say about the clearance a part needs, from SpeakCAD's Clearance Index.
31%fitted on the first print4 perfect, 5 too tight, 4 too loose.
0.20 mmmedian clearance reported perfect4 perfect reports behind the number.
13first triesNewest verdict 18 November 2026.

By kind of fit

Kind of fitFirst triesFittedToo tightToo looseFirst-try fitMedian perfect
Pockets and cradles40400%—
Lids, caps and snaps320167%0.15 mm
Threads and bayonets10100%—
Slots and slides1100100%0.75 mm
Other fits410325%0.20 mm

By clearance

ClearanceFirst triesFittedToo tightToo looseFirst-try fit
0.00 mm30300%
0.05 mm10100%
0.10 mm1100100%
0.20 mm2200100%
0.25 mm10100%
0.30 mm10010%
0.45 mm10010%
0.50 mm20020%
0.75 mm1100100%

How to read it

These are first tries, self-reported, on coupons and full parts. The printer in the row is the machine saved on the account; the filament is not recorded. Use the median as a starting point, print a five-minute coupon with the filament you plan to use, and let the verdict calibrate your own machine. The same figures across every printer are on the Clearance Index.Page reviewed 2026-11-22.

Bambu Lab P2S 0.4 nozzle clearance questions

Across 13 first tries on this printer, 4 fitted, 5 were too tight and 4 too loose: 31% fitted on the first print. The median clearance reported perfect is 0.20 mm, with the middle half of the reports between 0.18 mm and 0.34 mm. Print a five-minute coupon on your own machine before the full part.

13 first tries, counted once per person, model and fit. A coupon printed again after a verdict confirms the fit and does not add a second data point. The page is rebuilt hourly; the newest verdict here is 18 November 2026.

Make a part in SpeakCAD, open Fit Check, print the coupon and report how it fitted. The verdict calibrates your printer on your account, and the first try feeds this page's figures. The coupon is free.

Print a coupon for your Bambu Lab P2S 0.4 nozzle

Fit Check cuts a five-minute test from the part that has to fit. Report how it went and every model after it is built with your printer's clearance.