---
title: "How to design 3D printed Christmas ornaments, cookie cutters and tree decorations in 2026"
description: "Design Christmas prints that fit: flat ornaments with a name and a year, a loop sized to the ribbon, snowflakes, a tree-topper adapter, cutters, LED holders."
canonical: https://speakcad.com/blog/how-to-design-christmas-ornaments-and-cookie-cutters-2026
published: 2026-11-17
updated: 2026-11-17
publisher: SpeakCAD
---

# How to design 3D printed Christmas ornaments, cookie cutters and tree decorations in 2026

> Design Christmas prints that fit: flat ornaments with a name and a year, a loop sized to the ribbon, snowflakes, a tree-topper adapter, cutters, LED holders.

To design a Christmas ornament that prints well, keep it flat: a plate or a disc 2 to 3 mm thick, a name and the year in letters at least 5 mm tall, and a hanging hole sized to your ribbon with 3 mm of plastic around it. Stars and snowflakes are flat outlines with arms no thinner than 2 mm. A cookie cutter is a 0.8 to 1 mm cutting edge, 12 to 15 mm tall, with a flange to press on. Everything that has to fit something (the tip of the tree, a tea light, the mantel) starts with one measurement.

## The short answer

- **A name and a year:** by hand with the free hand tools, letters raised or engraved 0.6 to 1 mm.
- **The hanging loop:** a hole 1 to 2 mm wider than the ribbon or the hook, 3 mm in from the edge.
- **Snowflakes and stars:** stylised flat outlines, described to the AI.
- **A tree-topper adapter:** a sleeve between the measured tree tip and the topper's socket.
- **Cookie cutters:** a thin edge, a pressing flange, short contact with food only.
- **Candle and tea-light holders:** LED lights only.
- **Stocking hooks:** a clamp sized to the mantel shelf.
- **Sculpted figures** (a nativity set, a reindeer): download them ([where to download STL files](/blog/best-sites-to-download-stl-files-2026)). SpeakCAD is a CAD for parts with real sizes and stylised flat shapes.

## Step 1: a flat ornament with a name and the year

By hand, free: start from the Plate shape (70 x 50 x 3 mm is a good size) or the Cylinder shape for a disc, then Text on the top face. The tool writes one line of up to 40 characters in one bold font, so a name and a year are two Text edits, one above the other.

- **Letter height:** 5 mm or more reads cleanly with a 0.4 mm nozzle; 8 to 10 mm for a name on a tree.
- **Depth:** 0.6 to 1 mm, raised or engraved.
- **Length:** each capital is a little under the letter height wide, so a six-letter name 9 mm tall needs about 52 mm.
- **Two colours from one nozzle:** raise the letters and change filament at the layer where they start.

Print it face up, flat on the bed. [Add text to a 3D print](/guides/add-text-to-a-3d-print) has the tool step by step.

## Step 2: the hanging loop, sized to the ribbon

**Measure** the ribbon's width, or the wire of the hook (a 6 mm ribbon here; measure yours).

- **A round hole** 4 mm across takes thread, twine and wire hooks.
- **A slot** for a flat ribbon is the ribbon's width plus 1 mm, and 2 mm tall: 7 x 2 mm for a 6 mm ribbon.
- **Keep 3 mm of plastic** between the hole and the edge. The Hole tool places the centre at a typed distance from the edges.

## Step 3: snowflakes and stars as flat outlines

These are a sentence to the AI, which draws a stylised outline: recognisable and printable, not traced from a photo. Keep the arms 2 mm wide or more (a printed wall needs at least 1.2 mm, and details under 0.8 mm disappear), the part 2 to 3 mm thick and 60 to 90 mm across, and say the geometry: how many arms, how many side branches, how wide. A five-pointed star works the same way, and has room for a name across its centre.

> A snowflake ornament 80 mm across and 2.5 mm thick: six arms 3 mm wide, each with two pairs of side branches 2 mm wide at 60 degrees, a hexagon 20 mm across in the centre, and a 4 mm hanging hole in the tip of one arm with 3 mm of material around it

## Step 4: a tree-topper adapter

**Measure** the tip where the topper will sit and the inside of the topper's socket. The sleeve's bore is the tip plus 0.5 mm; its outside is the socket minus 0.5 mm. By hand, it is the Cylinder shape with a Hole.

> A tree-topper adapter: a sleeve 80 mm long with a 12.5 mm bore 70 mm deep to slide onto a 12 mm tree tip, 21.5 mm across outside to fit a topper socket 22 mm wide, closed at the top, with four slits 30 mm long at the open end so it grips

## Step 5: gift tags

A plate 60 x 35 x 2 mm, a name in Text, a 4 mm hole: free to shape by hand. [The gift list](/blog/best-3d-printed-gifts-2026) has the presents.

## Step 6: cookie cutters

| Part | Size | Why |
|---|---|---|
| Cutting edge | 0.8 to 1 mm | Two lines from a 0.4 mm nozzle: thin enough to cut, strong enough not to snap |
| Height | 12 to 15 mm | Rolled dough is 4 to 6 mm; the rest keeps your fingers out |
| Pressing flange | 3 to 5 mm wide, 2 mm thick, around the top | Spreads the push over your palm, stiffens the outline |
| Smallest inside detail | 4 mm | A narrower notch fills with dough and tears |
| Overall size | 60 to 100 mm | Bigger cookies break when you lift them |

Print the cutter flange down, edge up. Outlines with few thin points cut best: a star, a tree, a bell, a stocking. A name goes inside as a stamp, its letters 1 mm lower than the cutting edge, so it presses into the dough without cutting it.

> A Christmas tree cookie cutter 85 mm tall with three tiers and a short trunk: a 0.9 mm cutting edge 14 mm tall, and a flange 4 mm wide and 2 mm thick around the top edge for pressing, printed flange down

Printed cutters are widely used for cookies, with the precautions of [the Halloween cutter guide](/blog/halloween-cookie-cutters-3d-print):

- **Short contact only.** Cut, then let go. Layer lines can trap dough and bacteria, so wash the cutter right away in warm, not hot, soapy water with a brush, and dry it.
- **No dishwasher.** PLA warps above about 55 °C. PETG holds more heat but scratches the same way.
- **Clean filament and nozzle.** Plain PLA or PETG from a brand that states food-contact compliance for the raw material, and a stainless steel nozzle rather than an old brass one.
- **Cling film** over the dough before you press removes most of the question, and the edge still cuts through it.
- **A seasonal tool.** Reprint it next year rather than keep a cracked one.

## Step 7: candle and tea-light holders, for LED lights only

PLA softens around 60 °C and PETG around 80 °C, and both burn. A candle flame is far hotter than either, so a printed holder is for LED tea lights and LED candles, whatever the plastic. **Measure** your LED light (many are 36 to 38 mm across; brands differ) and make the pocket 1 mm wider.

> A star-shaped holder for an LED tea light 38 mm across: a five-pointed star 110 mm across and 20 mm tall with a round pocket 39 mm across and 14 mm deep in its centre, and a 2 mm floor

## Step 8: stocking hooks sized to the mantel

**Measure** the thickness of the mantel shelf. A printed hook is light, so it holds by gripping the shelf, not by its own weight: make the gap the thickness plus 0.6 mm, the part 5 mm thick, and print it lying on its side so the layers run around the bend.

> A stocking hook for a mantel shelf 40 mm thick: a C clamp 25 mm wide with a 40.6 mm gap, 5 mm thick, reaching 60 mm back over the top of the shelf, with a hook 20 mm deep under the front edge, printed lying on its side

It holds an empty or lightly filled stocking. For a heavy one, use a screw-in hook; above a working fire, print in PETG or not at all.

## Timing

The [print time calculator](/3d-print-time-calculator) gives the print time of each file on your printer. No printer? [The print service](/3d-printing-service) delivers in about 2 to 3 weeks to North America, Europe and Oceania: order early.

Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.

## Prompts to try

- A snowflake ornament 80 mm across and 2.5 mm thick: six arms 3 mm wide, each with two pairs of side branches 2 mm wide at 60 degrees, a hexagon 20 mm across in the centre, and a 4 mm hanging hole in the tip of one arm with 3 mm of material around it ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DA%2520snowflake%2520ornament%252080%2520mm%2520across%2520and%25202.5%2520mm%2520thick%253A%2520six%2520arms%25203%2520mm%2520wide%252C%2520each%2520with%2520two%2520pairs%2520of%2520side%2520branches%25202%2520mm%2520wide%2520at%252060%2520degrees%252C%2520a%2520hexagon%252020%2520mm%2520across%2520in%2520the%2520centre%252C%2520and%2520a%25204%2520mm%2520hanging%2520hole%2520in%2520the%2520tip%2520of%2520one%2520arm%2520with%25203%2520mm%2520of%2520material%2520around%2520it))
- A Christmas tree cookie cutter 85 mm tall with three tiers and a short trunk: a 0.9 mm cutting edge 14 mm tall, and a flange 4 mm wide and 2 mm thick around the top edge for pressing, printed flange down ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DA%2520Christmas%2520tree%2520cookie%2520cutter%252085%2520mm%2520tall%2520with%2520three%2520tiers%2520and%2520a%2520short%2520trunk%253A%2520a%25200.9%2520mm%2520cutting%2520edge%252014%2520mm%2520tall%252C%2520and%2520a%2520flange%25204%2520mm%2520wide%2520and%25202%2520mm%2520thick%2520around%2520the%2520top%2520edge%2520for%2520pressing%252C%2520printed%2520flange%2520down))
- A tree-topper adapter: a sleeve 80 mm long with a 12.5 mm bore 70 mm deep to slide onto a 12 mm tree tip, 21.5 mm across outside to fit a topper socket 22 mm wide, closed at the top, with four slits 30 mm long at the open end so it grips ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DA%2520tree-topper%2520adapter%253A%2520a%2520sleeve%252080%2520mm%2520long%2520with%2520a%252012.5%2520mm%2520bore%252070%2520mm%2520deep%2520to%2520slide%2520onto%2520a%252012%2520mm%2520tree%2520tip%252C%252021.5%2520mm%2520across%2520outside%2520to%2520fit%2520a%2520topper%2520socket%252022%2520mm%2520wide%252C%2520closed%2520at%2520the%2520top%252C%2520with%2520four%2520slits%252030%2520mm%2520long%2520at%2520the%2520open%2520end%2520so%2520it%2520grips))

## FAQ

### How do I design a 3D printed Christmas ornament with a name?

Keep it flat: a plate or a disc 2 to 3 mm thick, the name in letters 5 mm tall or more, raised or engraved 0.6 to 1 mm, and a 4 mm hanging hole at least 3 mm in from the edge. In SpeakCAD that is the Plate shape, the Text tool and the Hole tool, by hand and free; the year is a second line of text under the name.

### How thick should a 3D printed Christmas cookie cutter be?

The cutting edge 0.8 to 1 mm (two lines from a 0.4 mm nozzle) and 12 to 15 mm tall, with a flange 3 to 5 mm wide and 2 mm thick around the top to press on. Keep inside details at 4 mm or more and the whole cutter between 60 and 100 mm, and print it flange down.

### Are 3D printed cookie cutters food safe?

They are fine for the short contact of cutting dough if you use a plain PLA or PETG, a stainless nozzle, wash the cutter right after use in warm water, and keep it out of the dishwasher. Layer lines can trap residue, so do not store food in printed parts. Cling film over the dough avoids contact altogether.

### Can I put a real candle in a 3D printed holder?

No. PLA softens around 60 °C and PETG around 80 °C, and both burn. Use LED tea lights or LED candles only in a printed holder, whatever the plastic.

### Can I 3D print a snowflake or a star ornament without supports?

Yes, when it is a flat outline 2 to 3 mm thick printed lying on the bed. Keep the arms at least 2 mm wide, because a printed wall needs 1.2 mm or more and details under 0.8 mm disappear, and put the hanging hole in the tip of one arm with 3 mm of material around it.

## About SpeakCAD

SpeakCAD is the most intuitive CAD for 3D printing, made for people who own a 3D printer and need a part that fits something they have: tap a face and type a size to shape it with simple tools, or describe it to the AI, on your phone or computer, and download a print-ready STL, 3MF or G-code sliced for your printer.

SpeakCAD works inside ChatGPT and Claude as a plugin (an MCP server): ask the assistant for a part with its measurements and SpeakCAD's own CAD AI designs it, shows it in 3D in the chat and hands over a print-ready STL, 3MF or G-code sliced for your printer.

- Live demo, no account: https://speakcad.com/demo
- In ChatGPT, Claude and other MCP clients: https://speakcad.com/chatgpt-plugin, https://speakcad.com/claude-connector, https://speakcad.com/mcp-server
- Pricing: https://speakcad.com/pricing
- FAQ: https://speakcad.com/faq
- Site index for AI assistants: https://speakcad.com/llms.txt
