---
title: "The best sites for free STL files in 2026, and what to do when a model almost fits"
description: "Where to find free STL files in 2026: who runs each site, what it is good for, what the licences allow, and how to change a download that almost fits."
canonical: https://speakcad.com/blog/best-sites-to-download-stl-files-2026
published: 2026-11-17
updated: 2026-11-17
publisher: SpeakCAD
---

# The best sites for free STL files in 2026, and what to do when a model almost fits

> Where to find free STL files in 2026: who runs each site, what it is good for, what the licences allow, and how to change a download that almost fits.

For free models to print, start with Printables and MakerWorld, keep Thingiverse for its deep back catalogue, and go to MyMiniFactory or Thangs when a designer's paid work is worth paying for. That covers finding a model. The harder problem comes after the download: the model is 3 mm too narrow for your shelf, or it has no hole where your screw goes. The second half of this post is about that.

We make SpeakCAD, which appears twice below: a library of ready-made functional parts, and an editor that changes a downloaded STL. The facts about the other sites come from their own pages, read on 17 November 2026; the sources are at the end, and where another site is the better place to look, the list says so.

## The short answer

- **Free models for any printer, and G-code for a Prusa: Printables**, run by Prusa Research.
- **Free models for a Bambu Lab printer: MakerWorld**, on the same account as Bambu Lab's apps.
- **The old model nobody uploaded anywhere else: Thingiverse**, part of MyMiniFactory since February 2026.
- **Miniatures and paid designer work: MyMiniFactory.**
- **A designer's membership, or a licence to sell prints: Thangs.**
- **A functional part in your own size: SpeakCAD's library**, 650+ ready-made models whose dimensions you change before you download.

## Side by side

| Site | Who runs it | What you find there | Go there for |
|---|---|---|---|
| Printables | Prusa Research | Free models, pre-made G-code, a Store and Clubs | A first search; anything for a Prusa |
| MakerWorld | MakerWorld Singapore, beside Bambu Lab's apps | Free models, some with Bambu Lab print profiles; MakerLab | Models for a Bambu Lab printer |
| Thingiverse | MyMiniFactory, since February 2026 | More than 2.5 million things; the Customizer | The long back catalogue |
| MyMiniFactory | MyMiniFactory, London | A Store, Tribes subscriptions, the SoulCrafted label | Miniatures; paying a designer |
| Thangs | Thangs 3D, a Shapeways subsidiary | Files, memberships, prints made on demand | Commercial licences |
| SpeakCAD library | SpeakCAD (us) | 650+ functional parts with editable sizes | A bracket or holder in your size |

## Printables

Prusa Research runs Printables and describes it as one of the most popular databases of printable models. Models come as object files for any printer, and thousands of projects also carry pre-made G-code (print one only if it was sliced for your printer model). Around the free library sit a Store, Clubs and design contests. For Prusa owners, EasyPrint prepares a Printables model in the cloud and sends it to the printer.

**Look elsewhere if** you want print profiles made for a Bambu Lab printer: those live on MakerWorld.

## MakerWorld

Its terms name MakerWorld Singapore Pte. Ltd. as the provider, with Bambu Store, Bambu Handy and Bambu Studio as the Bambu Lab services around it, on one shared account. Some models carry print profiles for Bambu Lab printers, and the Bambu Handy app can start those on a connected printer. Beside the free models sit MakerLab, contests and crowdfunding. Uploaders choose each model's licence, Creative Commons among them.

**Look elsewhere if** your printer is another brand: the files download as usual, but the profiles are the point. [SpeakCAD vs MakerLab](/vs/makerworld-makerlab) covers its AI tools.

## Thingiverse

The oldest name here: MyMiniFactory's timeline calls it the first 3D printing community, and Thingiverse's own about page counts more than 2.5 million things, with a Creative Commons licence encouraged on each. Since February 2026 it belongs to MyMiniFactory, which says the open sharing stays. The Customizer changes the sizes an author exposed, on models built for it; [SpeakCAD vs Thingiverse Customizer](/vs/thingiverse-customizer) compares the two.

**Look elsewhere if** you want a print profile with the model: that is MakerWorld's and Printables' territory.

## MyMiniFactory

Launched in London in June 2013 as a free platform, it added a Store in 2018 and Tribes (subscriptions to a designer) in 2021. On the day we read it, its front page led with tabletop role-playing miniatures. Its SoulCrafted label, from 2025, marks designs made by people, and its about page says AI has no place on the site.

**Look elsewhere if** you need a bracket or an adapter rather than a miniature.

## Thangs

Thangs 3D, a subsidiary of Shapeways since December 2024, runs it as a marketplace: designers sell files, memberships and products printed on demand. Its terms spell out a point that matters to anyone who sells prints: you need the commercial licence from that designer's membership. It has iOS and Android apps.

**Look elsewhere if** you only want free files: start with Printables or MakerWorld.

## Cults, the one we could not check

Cults (cults3d.com) is on most lists of model sites, including the one in Prusa's help centre. Its own pages sat behind a bot check on the day of writing, so we could confirm nothing about it at the source, and we would rather say so than repeat other lists. Read its terms and the licence on the model's page before you rely on it.

## SpeakCAD's library

[The library](/library) holds 650+ ready-made functional parts: holders, brackets, organisers, enclosures, adapters. Most are parametric, so the pipe diameter or the drawer width is a number you retype before the download. Opening one in a free account, resizing it in the viewer and downloading the STL or 3MF are free.

**Look elsewhere if** you want figurines, toys, miniatures or decor: the library is functional parts only, and far smaller than any site above.

## Licences, in one paragraph

Free to download is not free to sell. Each model page carries the licence its designer chose, usually a Creative Commons one. BY asks for credit, SA asks that a remix be shared under the same licence, ND means you may not share a modified version, and NC rules out uses mainly aimed at commercial advantage or payment, which covers selling prints. Printing for yourself and changing a model for your own use are fine under all of them. Selling prints of an NC model needs the designer's permission, which some sell as a commercial licence with a membership. Read the licence on the model's page, every time.

## When the model almost fits

A downloaded STL is a mesh: thousands of triangles, with no hole or width to retype. That is why the slicer's scale box is usually the wrong fix: it scales the screw holes and the walls along with the part. What works depends on what is wrong.

| What is wrong | What works | In SpeakCAD |
|---|---|---|
| The whole model should be bigger or smaller, and nothing has to fit | Scale it in the slicer | Nothing to do |
| It lacks a hole, a slot, a tab or a label | Add the feature to the mesh | [Drop the file](/edit-stl) with no change typed: Hole, Cut, Add and Text work on the mesh by hand, free |
| One size is wrong: 3 mm too narrow, a slot for a 10 mm cable when yours is 12 | Rebuild it with dimensions, then change the one number | Upload it and say what must change and what must stay: an AI request |
| A feature inside it must move or change size | Say where it is and how big | An AI request, with the position in millimetres |
| It is a sculpture | A mesh editor such as Blender | Not the tool for it |

**Adding a hole** is the commonest change and the easiest. Open the STL with no change typed, tap the face, pick Hole, choose the screw size (the M3 preset is 3.4 mm, so the screw slides through) and type its distance from two edges. A file shaped only by hand downloads free with a free account. [Add a hole to an STL](/guides/add-a-hole-to-an-stl) shows the taps, and [adding text, holes and mounts to a download](/blog/add-text-holes-or-mounts-to-existing-model) covers the other additions.

**Changing one size** is not a scale: 3 mm wider means one dimension moves while the holes, walls and clips keep theirs. Upload the file, say what it is, what must change and what must stay, and the AI rebuilds it as a model with named dimensions. Function comes back faithfully (sizes, holes, walls, cutouts, lids), decorative detail approximately, sculpted detail not at all. [How to modify a Thingiverse or Printables model](/blog/how-to-modify-an-stl-file-from-thingiverse) walks through one, and [why scaling to 110 percent breaks every hole](/blog/resize-stl-without-breaking-fits) explains the trap.

## How we picked

1. **Who runs it, and does its own page say so today?** Two of these sites changed hands in the last two years.
2. **What is free, and what is sold?**
3. **Does a model come with what your printer needs,** a print profile or G-code?
4. **What does the licence let you do:** print, change, share, sell?
5. **What happens when the model almost fits?**

## Sources

Read on 17 November 2026:

- Printables: Prusa Research's pages, [Where can you get 3D models?](https://help.prusa3d.com/article/where-can-you-get-3d-models_2179), [EasyPrint](https://help.prusa3d.com/article/easyprint_898029) and [official brand models on Printables](https://www.prusa3d.com/article/prusa-research-partners-with-leading-brands-to-release-official-3d-printable-models-and-start-a-shift-in-the-industry_233349/). Printables' own about page was behind a bot check.
- MakerWorld: [home page](https://makerworld.com/en) and [terms of use](https://makerworld.com/en/user-agreement), updated 2 November 2026
- Thingiverse: [about](https://www.thingiverse.com/about)
- MyMiniFactory: [about us](https://www.myminifactory.com/profile/MyMiniFactory/about)
- Thangs: [about](https://thangs.com/resources) and [terms and conditions](https://thangs.com/resources/legal/terms-and-conditions), version 4.8
- Cults: not read (bot check); listed in Prusa's help page above
- Creative Commons: [about CC licences](https://creativecommons.org/share-your-work/cclicenses/)

Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.

## Prompts to try

- Attached is a drawer organiser I downloaded, 150 x 100 x 40 mm. Rebuild it 3 mm wider (153 mm) and keep the 1.6 mm walls and the three equal compartments. ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DAttached%2520is%2520a%2520drawer%2520organiser%2520I%2520downloaded%252C%2520150%2520x%2520100%2520x%252040%2520mm.%2520Rebuild%2520it%25203%2520mm%2520wider%2520(153%2520mm)%2520and%2520keep%2520the%25201.6%2520mm%2520walls%2520and%2520the%2520three%2520equal%2520compartments.))
- Attached STL is a wall bracket. Add two countersunk holes for 4 mm screws through the back plate, 40 mm apart and centred, and keep everything else as it is. ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DAttached%2520STL%2520is%2520a%2520wall%2520bracket.%2520Add%2520two%2520countersunk%2520holes%2520for%25204%2520mm%2520screws%2520through%2520the%2520back%2520plate%252C%252040%2520mm%2520apart%2520and%2520centred%252C%2520and%2520keep%2520everything%2520else%2520as%2520it%2520is.))
- Attached is a phone stand. Widen the cable slot from 8 mm to 12 mm and add a 2 mm lip at the front; keep the 60 degree angle. ([open in SpeakCAD](https://app.speakcad.com/signup?next=%2F%3Fprompt%3DAttached%2520is%2520a%2520phone%2520stand.%2520Widen%2520the%2520cable%2520slot%2520from%25208%2520mm%2520to%252012%2520mm%2520and%2520add%2520a%25202%2520mm%2520lip%2520at%2520the%2520front%253B%2520keep%2520the%252060%2520degree%2520angle.))

## FAQ

### What is the best site for free STL files in 2026?

Start with Printables (run by Prusa Research) and MakerWorld (in Bambu Lab's ecosystem) for free models, and Thingiverse for its back catalogue of more than 2.5 million things by its own count. MyMiniFactory and Thangs are where designers sell files and memberships. For a functional part in your own size, SpeakCAD's library has ready-made models with editable dimensions.

### Can I sell prints of an STL I downloaded for free?

Only if the licence on the model's page allows it. Most free models carry a Creative Commons licence, and the ones marked NC (non-commercial) rule out selling prints without the designer's permission. Some designers sell that permission as a commercial licence with a membership. Printing for yourself is fine under every Creative Commons licence.

### How do I change an STL that is almost the right size?

Not by scaling it in the slicer, which scales the screw holes and walls too. To add a hole, a slot or a label, open the STL in SpeakCAD with no change typed and use the hand tools on the mesh, free. To change one size and keep the rest, upload it and ask the AI to rebuild it as a model with dimensions, then change the one number.

### Is Thingiverse still running in 2026?

Yes. Its about page counts more than 2.5 million things and says that Thingiverse has been part of MyMiniFactory since February 2026, with the open sharing kept. Designs there are encouraged to carry a Creative Commons licence, and the Customizer still changes the sizes an author exposed on models built for it.

## About SpeakCAD

SpeakCAD is the most intuitive CAD for 3D printing, made for people who own a 3D printer and need a part that fits something they have: tap a face and type a size to shape it with simple tools, or describe it to the AI, on your phone or computer, and download a print-ready STL, 3MF or G-code sliced for your printer.

SpeakCAD works inside ChatGPT and Claude as a plugin (an MCP server): ask the assistant for a part with its measurements and SpeakCAD's own CAD AI designs it, shows it in 3D in the chat and hands over a print-ready STL, 3MF or G-code sliced for your printer.

- Live demo, no account: https://speakcad.com/demo
- In ChatGPT, Claude and other MCP clients: https://speakcad.com/chatgpt-plugin, https://speakcad.com/claude-connector, https://speakcad.com/mcp-server
- Pricing: https://speakcad.com/pricing
- FAQ: https://speakcad.com/faq
- Site index for AI assistants: https://speakcad.com/llms.txt
